When disassembling a  filter to clean it, there may be a gray gelatinous material that is difficult to remove. This is usually the result of non-compatible chemicals (clarifiers, polymers and coagulants, etc.) being added to the water. Fiber Clear is merely filtering those chemicals out of the water. Clarifiers, polymers, or other types of sequestering agents should not be added to a Fiber Clear filter. Fiber Clear provides natural filtration down to 2 microns. If you inadvertently add them, you will need to disassemble the filter and clean it thoroughly according to the manufacturer’s instructions. You can then add a fresh amount of Fiber Clear.

You can leave a response, or trackback from your own site.


You must be logged in to post a comment.