Yes, Fiber Clear may be used with cartridge filters. Add one Fiber Clear cup at a time to the skimmer per the instructions on the bag, or on the Fiber Clear website.  A cartridge filters your water at approximately the 20 micron level. Fiber Clear will filter your pool water to the 2 micron level. This finer filtration is removing debris and particulate matter that before has been passing through the filter. Because of this, you may experience an increase in pressure sooner than usual. Be sure to clean your cartridge according to the manufacturer’s directions. You may add more Fiber Clear as needed per the above directions after backwashing.

What effect will Fiber Clear have on my cartridge filter system?

When cleaning your cartridges, you will find that the cartridges will clean up easier since Fiber Clear has become the first line of defense against dirt and oils.

You can leave a response, or trackback from your own site.

Comment: