What should I expect when first using Fiber Clear?

When you first switch to Fiber Clear, you may have this experience. This is normal. The reason is Fiber Clear filters finer than D.E. Diatomaceous Earth filters between 4 to 5 microns. Fiber Clear filters down to 2 microns. Therefore, Fiber Clear is trapping all the debris and particulate matter that was before passing though the traditional filter media. You are really clearing and cleaning the water. Fiber Clear is doing its job. You may need to backwash again within 4 hours, as you convert your pool water to 2 micron quality. Once your water is accustomed to the finer filtration, you will experience about the same length of time, or longer,  between backwashes as you experienced with D.E.

You can leave a response, or trackback from your own site.

Comment: